Location -> Products -> Water Treatment -> On-line Electrode -> Residual Chlorine Electrode
Type：CXNS-70 chlorine sensor
Illustrate：It can online monitor the residual chlorine concentration for the drink water ,water disinfection in industrial process . It can also used in the swimming pools where the place need to measure the residual chlorine concentration.
CXNS-70 Chlorine Sensor
Main Features
1.Sensitive response ,good stability
2.Do not need to replace the diaPHragm and the electrolyte .
3.Suitable for variety of waste water , it is difficult to be damaged and anti-pollution
Main Parameters
| Measurement | HOCl/residual chlorine | Minim HOCl/residual chlorine |
| Range | 0.05~20ppmHOCl | 0.01~5ppm |
| Polarization time | First time 30min | First time 90min |
| Second time 10min | Second time 45min | |
| Response time |
0%﹤2min(room temperature ) 95%﹤5min(room temperature) |
|
| Operating temperature | 2~45C | |
| Min velocity | 200~250ml/min,flow-through flow can not less than 30L/h | |
| PH range | 4~8.2PH | |
| Proof pressure range | 0~1bar | |
| Temperature compensation | Thermal resistance value can be customize by the requests | |
| Electrode cable | 3m high impedance and low noise shielded cable | |
| Electrode size | Diameter 20mm ,length 70mm | |
| Electrode material | 316L stainless steel shell , PTFE cap | |
Last：CXNS-238 constant voltage chlor.. Next：沒有了
